Не шутка, однако... многие пишут, что то-то и то-то изделие педалит сильно лучше на чахлой батарейке.
ИМХО почти в каждой искажалке стоит попробовать.
Статья:
http://www.beavisaudio.com/Projects/DBS/Цитата: “put a 5k linear pot in series with the positive terminal to the circuit. that's all you need to simulate a typical dying 9V battery. the resistance range is almost identical to the chemical build-up over time using a pedal that draws around 5mA. if you don't believe me. try it, and then substitute a dead/dying battery and listen for a difference with the pot shorted. batteries can't die without building up series resistance. likewise, the reason for voltage drop is a result of the increased series resistance! i put it to you... the lowering of battery voltage is a result of exactly the same mechanism as increased series resistance. a pot in series with a battery will most certainly simulate the dying of a battery.” – Zachary Vex
*** Я бы добавил еще небольшой кондер на землю после резистора (величина его определяется током потребления схемы и ее особенностями в плане потребления тока в состоянии покоя и при подаче сигнала). Это предотвратит возможный возбуд схемы и более точно "воспроизведет" свойства батарейки, которая, будучи подсаженный, "накапливает мощь" наподобие конденсатора, и вначале все-таки выдает некоторый импульс тока; это своего рода и легкий закос под "саг" блока питания {DDD}
На практике очень просто:
