Я кстати на просторах встречал фундаментальный труд: "Усилители RIAA – коррекции на вакуумных триодах для «скоростных» (электродинамических) звукоснимателей. Некоторые принципы построения схем без обратных связей.
Расчёт и настройка корректирующих цепей."
А также такую вот схемку:
Valve Preamplifier (1)
Classic technology revisited
Design by B. Stuurman
http://fotki.yandex.ru/users/kdolotov/view/369230/The phono preamplifier is built
according to a modified Philips
design, using an EF86 or its equivalents
the 6267 or CV2901 (V1). This
is an outstanding valve for this purpose, due to its low noise and minimal microphonics.
The necessary RIAA compensation
is obtained by using frequency-dependent
feedback. At the average output level of an
MD cartridge, the output voltage of the phono
stage is approximately 54 mV, which is also
the input sensitivity of the following control
amplifier.